2010年7月27日 - 辛辛那提，俄亥俄州- ROTEX全球有限責任公司,作為全球篩選技術的領導者，提供了旋回往復安檢全線(full line of Gyratory Reciprocating Screeners)™設計的準確高生產率干法篩分機。 ROTEX ®旋回往復(full line of Gyratory Reciprocating Screeners)篩網清洗系統，提供高度準確的分離和更高的生產率和較高的產品產量。回旋往復振動篩被安裝在世界各地數以千計的地點，在多個行業廣泛應用。

         與許多競爭性振動篩相比，ROTEX ®旋回往復(full line of Gyratory Reciprocating Screeners)振動篩擁有兩個獨立的，獨特的篩選檢查系統，以最大限度地提高效率。在對近篩網表面回旋往復運動篩選材料的最大尺寸不足的情況，盡量減少了通過篩網篩選物質損失的大小。該系統還能連續的對篩網進行清潔，防止篩網堵塞物料，最大限度地延長正常運行時間。

         ROTEX ®旋轉往復式振動篩提供比傳統的往復式篩分機更高的產量。沒有垂直分量系統，從而保持與篩網保持聯系的物質。在料底回旋運動迅速stratifies在整個篩選表面的材料，最大限度地提高篩網利用率。篩網上的清潔球不斷沖擊篩網表面，防止篩網堵孔，進一步協助物料分級。因此，符合篩網孔勁的物料能夠快速通過篩網分級。近線性往復運動在放電結束去除這些粒子的大小最接近的篩網網孔，同時對篩選物料進行準確分級，確保良好的產品和較高篩分比例，更準確地把產品進行分離。

         許多相互競爭的安檢人員使用一個檢查行動，以履行致盲和顆粒分離功能，可以犧牲一個或兩個函數的有效性。由ROTEX ®旋回往復安檢人員利用組合提供高效率的行動分離的極端尖銳，生產一致的規格的產品在不犧牲產量。該材料是暴露在全網狀開口由于屏幕的甲板上略有傾斜，確保了一致的銳利，明確分工。此外，從盲目的自由使Rotex用戶選擇的需要，以達到預期的分離確切開口，在上最高規格的產品產量造成的屏幕。

          ROTEX ®旋回往復安檢最大化損失最小的好產品的輸出，有助于降低處理成本。在飼料月底圓周運動立即在屏幕上傳播的物質，造成的罰款，對篩選下來的畫面，把好產品消除尾以上。同時，超大顆粒輕輕轉達了屏幕，最大限度地減少產品質量交叉到拒絕。這種分離精度，無需拋棄，重新處理，或找到替代產品使用的損失。此外，獨特的Rotex能力，提前或推遲材料在放電結束通路使得進一步的微調，以實現應用程序的最有效和最準確的議案。

          安檢的范圍可以從1至5層篩網表面，對于開口1 / 2“，和325目?？蛇x擇地板安裝，電纜懸掛，并在鋼框架結構安裝。

以上信息由中國振動機械網編輯翻譯ROTEX原文，供行業交流學習使用，因水平有限、如有錯誤，敬請詳解！

           以下為ROTEX原文：

July 27, 2010 — CINCINNATI, OH (July 27, 2010)—ROTEX Global, LLC, a global leader in screening technologies, offers a full line of Gyratory Reciprocating Screeners™ designed to accurately separate dry materials at high-production rates. ROTEX® Gyratory Reciprocating Screeners incorporate numerous innovative design features that provide unparalleled performance, ease of operation, and durability. These self-contained production screening machines utilize a unique gyratory-reciprocating motion and a positive screen mesh cleaning system that provide highly accurate separations and greater product yields at higher production rates. Gyratory Reciprocating Screeners are installed in thousands of locations worldwide, operating in a wide range of industries.

Unlike many competing screening machines, ROTEX® Gyratory Reciprocating Screeners impart two separate, distinct screening actions to maximize screening efficiency. The gyratory-reciprocating motion of the near-horizontal screen surface gives undersize material the maximum opportunity to pass through the mesh openings without the loss of near-size material. The motion also produces a continuous mesh cleaning action that prevents the material from lodging in the mesh openings, maximizing screening uptime.

ROTEX® Gyratory Reciprocating Screeners deliver higher yields than traditional screening machines. There is no vertical component to the motion, thus keeping the material in constant contact with the screen. The gyratory motion at the feed end rapidly stratifies the material over the full screening surface, maximizing screen utilization. Aggressive mesh cleaning balls continuously tap the screen surface, preventing screen blinding and further aiding stratification. Thus, a greater amount of undersize particles can quickly pass through the screen. The nearly linear reciprocating motion at the discharge end removes those particles closest in size to the mesh openings while gently conveying the quality material off the screen, ensuring a higher amount of good product is accurately separated into functional product.

Many competing screeners use one screening action to perform blinding and particle separation functions, which can sacrifice the effectiveness of one or both functions. The highly efficient combination of actions utilized by ROTEX® Gyratory Reciprocating Screeners provide extreme sharpness of separation, producing consistent on-spec product without sacrificing yield. The material is exposed to full mesh openings due to a slight incline of the screen deck, ensuring consistently sharp, well-defined separations. Additionally, freedom from blinding enables the Rotex user to choose screens with the exact openings required to achieve the desired separation, resulting in maximum yield of on-spec product.

ROTEX® Gyratory Reciprocating Screeners maximize output with minimal loss of good product, helping to reduce process costs. The circular motion at the feed end immediately spreads material across the screen, causing the fines to sift down against the screen, eliminating tail-over into good product. At the same time, oversize particles are gently conveyed off the screen, minimizing cross-over of quality product into the rejects. This accuracy of separation eliminates the need to discard, reprocess, or find substitute uses for lost product. In addition, the unique Rotex ability to advance or delay material flow at the discharge end allows further fine-tuning to achieve the most efficient and accurate motion for the application.

Screeners can range from one to five screen surfaces, for separations with openings 1/2" to 325 mesh. Optional floor mounting, cable suspension, and mounting on a structural steel framework are available.

For more information on ROTEX® Gyratory Reciprocating Screeners, or to obtain information on how ROTEX Screeners can resolve your screening challenges, contact ROTEX Global, LLC, 1230 Knowlton St., Cincinnati, OH 45223, www.rotex.com, 1-800-453-2321, Fax 513-541-4888, or email info@rotex.com.
About ROTEX GLOBAL, LLC
About ROTEX Global, LLC
ROTEX Global, LLC, is a pioneer and global leader in the development of screening equipment and technology for the process industries. Rotex offers an innovative line of separation equipment that includes: Gyratory and Vibratory Screeners and Sifters for Dry Applications, Liquid-Solid Separators for Wet Applications, Automated Particle Size Analyzers, and Vibratory Feeders and Conveyors. ROTEX® Parts & Service offers a full range of genuine parts and rebuild services.

Press Contact:
Steve Kirschner
Managing Director
Stimulus Worldwide
(513) 421-1169
skirschner@stimulusworldwide.com